VCV.65.260.2PH.24V — 3000 mm

Add grille to convector price

Galvanized

85,573 ₽

without grille

Stainless steel

91,500 ₽

without grille

Grille

25,992 ₽

separate

VCV.65.260.2PH.24V

2 tube, horizontal

VCV.65.260.2PH.24V

Characteristics

Height adjustment	0–40 mm
Heat exchanger	2 tube, horizontal
Fin length	L-350 mm
Fin width	260 mm
Fin height	65 mm
Tube diameter	12 mm
Pressure	up to 16 MPa
Connection	2 × G1/2
Center distance	50 mm
Fan	24DC

Height, mm 65

Width, mm 260

Thermal output, W 5347 W

Standard length 3000 mm

Comparison of models 3000 mm long by height and width

Show prices with grille

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.65.260.2PH.24V	260 mm	5,347	85,573	91,500	25,992
VCV.65.300.2PH.24V	300 mm	5,922	86,847	93,913	29,133

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.70.260.2PH.24V	260 mm	6,573	85,573	91,500	25,992
VCV.70.300.2PH.24V	300 mm	7,267	86,847	93,913	29,133

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.75.260.2PH.24V	260 mm	7,532	85,573	91,500	33,096
VCV.75.300.2PH.24V	300 mm	8,341	86,847	93,913	36,105
VCV.75.360.4PH.24V	360 mm	11,635	101,689	109,902	40,619
VCV.75.400.4PH.24V	400 mm	12,499	102,962	123,541	43,629

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.80.260.2PH.24V	260 mm	7,939	85,573	91,500	33,096
VCV.80.300.2PH.24V	300 mm	8,777	86,847	93,913	36,105
VCV.80.360.4PH.24V	360 mm	11,757	101,689	109,902	40,619
VCV.80.400.4PH.24V	400 mm	12,821	102,962	123,541	43,629

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.90.200.2PH.24V	200 mm	6,216	84,644	89,632	28,581
VCV.90.260.2PH.24V	260 mm	8,234	86,321	93,083	33,096
VCV.90.300.2PH.24V	300 mm	9,559	87,615	95,524	36,105
VCV.90.360.4PH.24V	360 mm	11,862	102,459	111,533	40,619
VCV.90.400.4PH.24V	400 mm	13,125	103,753	113,974	43,629

Information for designers

Model comparison on this page is performed for a fixed length of 3000 mm under the same operating conditions. Thermal output is specified for standard design parameters. When selecting equipment, it is recommended to consider project requirements, hydraulic mode, and allowable installation dimensions.