VCV.80.360.4PH.24V — 1000 mm

Add grille to convector price

Galvanized

39,929 ₽

without grille

Stainless steel

42,899 ₽

without grille

Grille

14,325 ₽

separate

VCV.80.360.4PH.24V

4 tube, horizontal

VCV.80.360.4PH.24V

Characteristics

Height adjustment	0–40 mm
Heat exchanger	4 tube, horizontal
Fin length	L-350 mm
Fin width	360 mm
Fin height	80 mm
Tube diameter	12 mm
Pressure	up to 16 MPa
Connection	2 × G1/2
Center distance	50 mm
Fan	24DC

Height, mm 80

Width, mm 360

Thermal output, W 2884 W

Standard length 1000 mm

Comparison of models 1000 mm long by height and width

Show prices with grille

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.65.260.2PH.24V	260 mm	1,312	34,730	36,789	8,708
VCV.65.300.2PH.24V	300 mm	1,453	35,243	37,730	9,762

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.70.260.2PH.24V	260 mm	1,612	34,730	36,789	8,708
VCV.70.300.2PH.24V	300 mm	1,782	35,243	37,730	9,762

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.75.260.2PH.24V	260 mm	1,847	34,730	36,789	11,681
VCV.75.300.2PH.24V	300 mm	2,046	35,243	37,730	12,738
VCV.75.360.4PH.24V	360 mm	2,854	39,929	42,899	14,325
VCV.75.400.4PH.24V	400 mm	3,066	40,442	43,327	15,383

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.80.260.2PH.24V	260 mm	1,947	34,730	36,789	11,681
VCV.80.300.2PH.24V	300 mm	2,153	35,243	37,730	12,738
VCV.80.360.4PH.24V	360 mm	2,884	39,929	42,899	14,325
VCV.80.400.4PH.24V	400 mm	3,145	40,442	43,327	15,383

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.90.200.2PH.24V	200 mm	1,525	34,355	36,051	10,094
VCV.90.260.2PH.24V	260 mm	2,020	35,019	37,397	11,681
VCV.90.300.2PH.24V	300 mm	2,345	35,553	38,366	12,738
VCV.90.360.4PH.24V	360 mm	2,909	40,241	43,556	14,325
VCV.90.400.4PH.24V	400 mm	3,219	40,775	44,525	15,383

Information for designers

Model comparison on this page is performed for a fixed length of 1000 mm under the same operating conditions. Thermal output is specified for standard design parameters. When selecting equipment, it is recommended to consider project requirements, hydraulic mode, and allowable installation dimensions.