VCV.80.360.4PH.24V — 2500 mm

Add grille to convector price

Galvanized

87,064 ₽

without grille

Stainless steel

94,041 ₽

without grille

Grille

33,930 ₽

separate

VCV.80.360.4PH.24V

4 tube, horizontal

VCV.80.360.4PH.24V

Characteristics

Height adjustment	0–40 mm
Heat exchanger	4 tube, horizontal
Fin length	L-350 mm
Fin width	360 mm
Fin height	80 mm
Tube diameter	12 mm
Pressure	up to 16 MPa
Connection	2 × G1/2
Center distance	50 mm
Fan	24DC

Height, mm 80

Width, mm 360

Thermal output, W 9538 W

Standard length 2500 mm

Comparison of models 2500 mm long by height and width

Show prices with grille

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.65.260.2PH.24V	260 mm	4,338	73,631	78,644	21,671
VCV.65.300.2PH.24V	300 mm	4,805	74,749	80,729	24,290

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.70.260.2PH.24V	260 mm	5,333	73,631	78,644	21,671
VCV.70.300.2PH.24V	300 mm	5,896	74,749	80,729	24,290

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.75.260.2PH.24V	260 mm	6,111	73,631	78,644	27,627
VCV.75.300.2PH.24V	300 mm	6,768	74,749	80,729	30,148
VCV.75.360.4PH.24V	360 mm	9,440	87,064	94,041	33,930
VCV.75.400.4PH.24V	400 mm	10,140	88,182	105,781	36,452

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.80.260.2PH.24V	260 mm	6,441	73,631	78,644	27,627
VCV.80.300.2PH.24V	300 mm	7,121	74,749	80,729	30,148
VCV.80.360.4PH.24V	360 mm	9,538	87,064	94,041	33,930
VCV.80.400.4PH.24V	400 mm	10,402	88,182	105,781	36,452

Model	Length, mm	Thermal output, W	Side price, ₽	Bottom price, ₽	Grille ₽
VCV.90.200.2PH.24V	200 mm	5,043	72,820	77,022	23,844
VCV.90.260.2PH.24V	260 mm	6,680	74,264	79,983	27,627
VCV.90.300.2PH.24V	300 mm	7,755	75,403	82,096	30,148
VCV.90.360.4PH.24V	360 mm	9,623	87,720	95,428	33,930
VCV.90.400.4PH.24V	400 mm	10,649	88,859	97,542	36,452

Information for designers

Model comparison on this page is performed for a fixed length of 2500 mm under the same operating conditions. Thermal output is specified for standard design parameters. When selecting equipment, it is recommended to consider project requirements, hydraulic mode, and allowable installation dimensions.